dmesg - Compaq Presario v5015us
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-amd64 (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 10:07:46 UTC 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fea0000 (usable)
BIOS-e820: 000000002fea0000 - 000000002feac000 (ACPI data)
BIOS-e820: 000000002feac000 - 000000002ff00000 (ACPI NVS)
BIOS-e820: 000000002ff00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x2fea0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CEFFF write-protect
CF000-CFFFF uncachable
D0000-D5FFF write-back
D6000-D6FFF uncachable
D7000-DBFFF write-protect
DC000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 base 0030000000 mask FFF0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000002fea0000
0000000000 - 002fe00000 page 2M
002fe00000 - 002fea0000 page 4k
kernel direct mapping tables up to 2fea0000 @ 8000-b000
RAMDISK: 23640000 - 23f377ba
ACPI: RSDP 00000000000f7c40 00014 (v00 PTLTD )
ACPI: RSDT 000000002fea3ed4 00034 (v01 PTLTD RSDT 06040000 LTP 00000000)
ACPI: FACP 000000002feabe3b 00074 (v01 HP Piranha 06040000 ATI 000F4240)
ACPI: DSDT 000000002fea3f08 07F33 (v01 HP 309B 06040000 MSFT 0100000E)
ACPI: FACS 000000002feacfc0 00040
ACPI: SSDT 000000002feabeaf 000CF (v01 PTLTD POWERNOW 06040000 LTP 00000001)
ACPI: APIC 000000002feabf7e 00046 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: MCFG 000000002feabfc4 0003C (v01 HP PORSCHE 06040000 LOHR 00000000)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000002fea0000
Bootmem setup node 0 0000000000000000-000000002fea0000
NODE_DATA [0000000000009000 - 0000000000010fff]
bootmap [0000000000011000 - 0000000000016fd7] pages 6
(7 early reservations) ==> bootmem [0000000000 - 002fea0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00016d9584] TEXT DATA BSS ==> [0001000000 - 00016d9584]
#3 [0023640000 - 0023f377ba] RAMDISK ==> [0023640000 - 0023f377ba]
#4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#5 [00016da000 - 00016da150] BRK ==> [00016da000 - 00016da150]
#6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
found SMP MP-table at [ffff8800000f7c70] f7c70
[ffffea0000000000-ffffea0000bfffff] PMD -> [ffff880001c00000-ffff8800027fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0002fea0
On node 0 totalpages: 196159
DMA zone: 56 pages used for memmap
DMA zone: 100 pages reserved
DMA zone: 3843 pages, LIFO batch:0
DMA32 zone: 2628 pages used for memmap
DMA32 zone: 189532 pages, LIFO batch:31
SB4X0 revision 0x11
Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u2097152
pcpu-alloc: s90328 r8192 d24360 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
Built 1 zonelists in Node order, mobility grouping on. Total pages: 193375
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Node 0: aperture @ c7c0000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 755700k/785024k available (3083k kernel code, 388k absent, 28936k reserved, 2048k data, 592k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:256
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1790.899 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3581.79 BogoMIPS (lpj=7163596)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0x0 -> Node 0
tseg: 002ff00000
mce: CPU supports 5 MCE banks
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
SMP alternatives: switching to UP code
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Turion(tm) 64 Mobile Technology ML-32 stepping 02
Brought up 1 CPUs
Total of 1 processors activated (3581.79 BogoMIPS).
CPU0 attaching NULL sched-domain.
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
node 0 link 0: io port [1000, fffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [c0000000, cfffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [40000000, bfffffff]
bus: [00,ff] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [40000000, efffffff]
bus: 00 index 2 mmio: [a0000, bffff]
bus: 00 index 3 mmio: [f0000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e06fffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1a, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:13.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xb0001000-0xb0001fff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xb0002000-0xb0002fff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: reg 10 io port: [0x8400-0x840f]
pci 0000:00:14.0: reg 14 32bit mmio: [0xb0003000-0xb00033ff]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:14.1: reg 10 io port: [0x8430-0x8437]
pci 0000:00:14.1: reg 14 io port: [0x8424-0x8427]
pci 0000:00:14.1: reg 18 io port: [0x8428-0x842f]
pci 0000:00:14.1: reg 1c io port: [0x8420-0x8423]
pci 0000:00:14.1: reg 20 io port: [0x8410-0x841f]
pci 0000:00:14.5: reg 10 32bit mmio: [0xb0003400-0xb00034ff]
pci 0000:00:14.6: reg 10 32bit mmio: [0xb0003800-0xb00038ff]
pci 0000:01:05.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
pci 0000:01:05.0: reg 18 32bit mmio: [0xb0100000-0xb010ffff]
pci 0000:01:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xb0100000-0xb01fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:05.0: bridge io port: [0x00-0xfff]
pci 0000:00:05.0: bridge 32bit mmio: [0x000000-0x0fffff]
pci 0000:06:02.0: reg 10 32bit mmio: [0xb0200000-0xb0201fff]
pci 0000:06:06.0: reg 10 io port: [0xa000-0xa0ff]
pci 0000:06:06.0: reg 14 32bit mmio: [0xb0202000-0xb02020ff]
pci 0000:06:06.0: supports D1 D2
pci 0000:06:06.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:06:06.0: PME# disabled
pci 0000:00:14.4: transparent bridge
pci 0000:00:14.4: bridge io port: [0xa000-0xafff]
pci 0000:00:14.4: bridge 32bit mmio: [0xb0200000-0xb02fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
pci 0000:00:05.0: BAR 13: can't allocate resource
pci 0000:00:05.0: BAR 14: can't allocate resource
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:08: ioport range 0x1080-0x1080 has been reserved
system 00:08: ioport range 0x40b-0x40b has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x4d6-0x4d6 has been reserved
system 00:08: ioport range 0x870-0x87f has been reserved
system 00:08: ioport range 0xc00-0xc01 has been reserved
system 00:08: ioport range 0xc14-0xc14 has been reserved
system 00:08: ioport range 0xc50-0xc52 has been reserved
system 00:08: ioport range 0xc6c-0xc6c has been reserved
system 00:08: ioport range 0xc6f-0xc6f has been reserved
system 00:08: ioport range 0xcd4-0xcd5 has been reserved
system 00:08: ioport range 0xcd6-0xcd7 has been reserved
system 00:08: ioport range 0xcd8-0xcdf has been reserved
system 00:08: ioport range 0x8000-0x805f has been reserved
system 00:08: ioport range 0xf40-0xf47 has been reserved
system 00:08: ioport range 0x280-0x293 has been reserved
system 00:09: iomem range 0xe0000-0xfffff could not be reserved
system 00:09: iomem range 0xfff80000-0xffffffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x9000-0x9fff
pci 0000:00:01.0: MEM window: 0xb0100000-0xb01fffff
pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
pci 0000:00:05.0: IO window: disabled
pci 0000:00:05.0: MEM window: disabled
pci 0000:00:05.0: PREFETCH window: disabled
pci 0000:00:14.4: PCI bridge, secondary bus 0000:06
pci 0000:00:14.4: IO window: 0xa000-0xafff
pci 0000:00:14.4: MEM window: 0xb0200000-0xb02fffff
pci 0000:00:14.4: PREFETCH window: disabled
pci 0000:00:05.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
pci_bus 0000:01: resource 1 mem: [0xb0100000-0xb01fffff]
pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
pci_bus 0000:02: resource 0 mem: [0x0-0xfff]
pci_bus 0000:02: resource 1 mem: [0x0-0xfffff]
pci_bus 0000:06: resource 0 io: [0xa000-0xafff]
pci_bus 0000:06: resource 1 mem: [0xb0200000-0xb02fffff]
pci_bus 0000:06: resource 3 io: [0x00-0xffff]
pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
pci 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:13.1: PCI INT A disabled
pci 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:13.2: PCI INT A disabled
pci 0000:01:05.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 9181k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1355692853.472:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1493
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Linux agpgart interface v0.103
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
serial 0000:00:14.6: PCI INT B disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2012-12-16 21:20:55 UTC (1355692855)
Initalizing network drop monitor service
Freeing unused kernel memory: 592k freed
Write protecting the kernel read-only data: 4240k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
udev[68]: starting version 164
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:06:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xb0002000
ACPI: Invalid active0 threshold
8139too Fast Ethernet driver 0.9.28
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
8139too 0000:06:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:13.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (0 C)
eth0: RealTek RTL8139 at 0xffffc90000d40000, 00:0f:b0:bd:d8:6a, IRQ 22
libata version 3.00 loaded.
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 19, io mem 0xb0000000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xb0001000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ata1.00: ATA-6: ST960821A, 3.02, max UDMA/100
ata1.00: 117210240 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST960821A 3.02 PQ: 0 ANSI: 5
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4082N, CQ04, max MWDMA2
ata2.00: configured for MWDMA2
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4082N CQ04 PQ: 0 ANSI: 5
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
b43-pci-bridge 0000:06:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ssb: Sonics Silicon Backplane found on PCI device 0000:06:02.0
sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
PM: Starting manual resume from disk
PM: Resume from partition 8:6
PM: Checking hibernation image.
PM: Error -22 checking image file
PM: Resume from disk failed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udev[334]: starting version 164
Marking TSC unstable due to TSC halts in idle
processor LNXCPU:00: registered as cooling_device0
Switching to clocksource acpi_pm
ACPI: WMI: Mapper loaded
ACPI: Battery Slot [BAT1] (battery present)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input5
ACPI: Sleep Button [SLPF]
ACPI: AC Adapter [ACAD] (on-line)
input: PC Speaker as /devices/platform/pcspkr/input/input6
acpi device:10: registered as cooling_device1
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input7
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
EDAC MC: Ver: 2.1.0 Sep 23 2012
EDAC amd64_edac: Ver: 3.2.0 Sep 23 2012
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
amd64_edac: probe of 0000:00:18.2 failed with error -22
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:05.0: power state changed by ACPI to D0
pci 0000:01:05.0: power state changed by ACPI to D0
pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[drm] Initialized radeon 1.32.0 20080528 for 0000:01:05.0 on minor 0
phy0: Selected rate control algorithm 'minstrel'
Registered led device: b43-phy0::radio
Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
MC'97 0 converters and GPIO not ready (0x1)
Adding 632824k swap on /dev/sda6. Priority:-1 extents:1 across:632824k
EXT3 FS on sda5, internal journal
loop: module loaded
fuse init (API version 7.13)
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9
b43 ssb0:0: firmware: requesting b43/ucode5.fw
b43 ssb0:0: firmware: requesting b43/pcm5.fw
b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-32 processors (1 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x4
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6
powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x16
wlan0: direct probe to AP 1c:7e:e5:39:f3:78 (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 1c:7e:e5:39:f3:78 (try 1)
wlan0: authenticated
wlan0: associate with AP 1c:7e:e5:39:f3:78 (try 1)
wlan0: RX AssocResp from 1c:7e:e5:39:f3:78 (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
padlock: VIA PadLock not detected.
wlan0: no IPv6 routers present
wlan0: deauthenticating from 1c:7e:e5:39:f3:78 by local choice (reason=3)
[drm] Num pipes: 1
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 1.25 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
b43-pci-bridge 0000:06:02.0: PCI INT A disabled
pci 0000:01:05.0: PCI INT A disabled
ATI IXP MC97 controller 0000:00:14.6: PCI INT B disabled
ATI IXP AC97 controller 0000:00:14.5: PCI INT B disabled
pata_atiixp 0000:00:14.1: PCI INT A disabled
ehci_hcd 0000:00:13.2: PCI INT A disabled
ohci_hcd 0000:00:13.1: PCI INT A disabled
ohci_hcd 0000:00:13.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S3
Disabling non-boot CPUs ...
Back to C!
ACPI: Waking up from system sleep state S3
pci 0000:00:01.0: restoring config space at offset 0x9 (was 0x10001, writing 0xcff1c001)
pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x22209191, writing 0x2209191)
pci 0000:00:05.0: restoring config space at offset 0x9 (was 0x0, writing 0xfff0)
pci 0000:00:05.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
pci 0000:00:05.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1)
pci 0000:00:05.0: restoring config space at offset 0x6 (was 0x0, writing 0x30200)
pci 0000:00:05.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004)
ohci_hcd 0000:00:13.0: restoring config space at offset 0x3 (was 0x804008, writing 0x804010)
ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2b00017, writing 0x2b00013)
ohci_hcd 0000:00:13.1: restoring config space at offset 0x1 (was 0x2b00017, writing 0x2b00013)
ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00017, writing 0x2b00013)
pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
ATI IXP AC97 controller 0000:00:14.5: restoring config space at offset 0x1 (was 0x4300017, writing 0x4300013)
ATI IXP MC97 controller 0000:00:14.6: restoring config space at offset 0x1 (was 0x4300017, writing 0x4300013)
pci 0000:01:05.0: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00003)
pci 0000:00:05.0: setting latency timer to 64
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
atiixp: codec reset timeout
ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:01:05.0: power state changed by ACPI to D0
pci 0000:01:05.0: power state changed by ACPI to D0
pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
b43-pci-bridge 0000:06:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
sd 0:0:0:0: [sda] Starting disk
ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: configured for MWDMA2
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
PM: Finishing wakeup.
Restarting tasks ... done.
b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] Num pipes: 1
wlan0: direct probe to AP 1c:7e:e5:39:f3:78 (try 1)
wlan0: direct probe to AP 1c:7e:e5:39:f3:78 (try 2)
wlan0: direct probe responded
wlan0: authenticate with AP 1c:7e:e5:39:f3:78 (try 1)
wlan0: authenticated
wlan0: associate with AP 1c:7e:e5:39:f3:78 (try 1)
wlan0: RX AssocResp from 1c:7e:e5:39:f3:78 (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present